Stocked in 95A Durometer, tubes/springs are useful in applications where vibration, corrosion and magnetism prevent the use of steel springs. Also, urethane springs have proven to be safest, most efficient and reliable compression material for punching, stamping and drawing dies.
The K•Prene® urethane Tube/Spring material is a polyether-elastomer that reacts similarly to an incompressible fluid. The volume of material moved by compression is displaced laterally in the form of bulging sides. An approximate change in the diameter of our K•Prene® urethane Tubes/Springs can be made by increasing the diameter by the same amount of compression.
Example: A 1.50″ long spring is to be deflected by 15% or .225″. The diameter will then also increase roughly by .225″. The material’s lateral expansion must be considered for many applications.
The maximum recommended free (unloaded) length is 2.5 times the springs outside diameter, although springs may be stacked with guide
rods and washer-shaped spacers.
Suggested maximum cyclic frequencies and deflection percentages of free length are summarized by the following for 95A Durometer Tubes/Springs.
| Maximum Deflection | Cycle Per Hour | |
| Slow speeds of short runs | Less than 25% | 200 |
| Intermittent | Up to 25% | 700 |
| Continuous | Up to 15% | 12,000 |
Advantages of Urethane Tubes/Springs Vs. Conventional Springs:
Abrasion resistance- They do not fragmentize
- High load-carrying capability
- Protection from marring/galling
- Longer life
- Oil and solvent resistance (See chart on page 12)
- Low noise
- Vibration damping and shock absorbance
- 100% load-bearing surface
- Effectiveness between -30° F. and 180° F.
Tubes/Springs
Pricing Current as of 2020
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 3/16″ | 11/16″ High Press. | 1-1/4″ | KPS0316H01104 | 220 | – | 1036 | $4.15 |
| 1-1/2 | KPS0316H01102 | 200 | – | 904 | 4.40 | ||
| 12 | KPS0316H12000 | * | – | – | 18.25 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 1/4″ | 3/4″ High Press. | 1″ | KPS0104H01000 | 325 | – | 1101 | 3.65 |
| 1-1/4 | KPS0104H01104 | 250 | – | 975 | 4.15 | ||
| 1-1/2 | KPS0104H01102 | 215 | – | 790 | 4.40 | ||
| 1-3/4 | KPS0104H01304 | 183 | – | 703 | 4.80 | ||
| 12 | KPS0104H12000 | * | – | – | 18.70 | ||
| 7/8″ Very High Press. | 1″ | KPS0104V01000 | 475 | 1294 | – | 3.75 | |
| 1-1/4 | KPS0104V01104 | 350 | 1131 | – | 4.30 | ||
| 1-1/2 | KPS0104V01102 | 302 | 1022 | – | 4.60 | ||
| 1-3/4 | KPS0104V01304 | 275 | – | – | 4.95 | ||
| 12 | KPS0104V12000 | * | – | – | 19.75 | ||
| 1″ Ultra High Press. | 1″ | KPS0104U01000 | 712 | 1543 | – | 3.90 | |
| 1-1/4 | KPS0104U01104 | 547 | 1266 | – | 4.50 | ||
| 1-1/2 | KPS0104U01102 | 399 | 1082 | – | 4.80 | ||
| 1-3/4 | KPS0104U01304 | 348 | 933 | – | 5.15 | ||
| 12 | KPS0104U12000 | * | – | – | 21.30 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 5/16″ | 13/16″ High Press. | 1-1/4″ | KPS0516H01104 | 280 | – | 1037 | 4.25 |
| 1-1/2 | KPS0516H01102 | 255 | – | 936 | 4.55 | ||
| 1-3/4 | KPS0516H01304 | 235 | – | 863 | 4.90 | ||
| 2 | KPS0516H02000 | 225 | – | 809 | 5.35 | ||
| 12 | KPS0516H12000 | * | – | – | 19.20 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 3/8″ | 7/8″ High Press. | 1″ | KPS0308H01000 | 444 | – | 1027 | 3.90 |
| 1-1/4 | KPS0308H01104 | 347 | – | 957 | 4.50 | ||
| 1-1/2 | KPS0308H01102 | 275 | – | 910 | 4.80 | ||
| 1-3/4 | KPS0308H01304 | 224 | – | 876 | 5.20 | ||
| 2 | KPS0308H02000 | 199 | – | 851 | 5.70 | ||
| 12 | KPS0308H12000 | * | – | – | 21.45 | ||
| 1″ Very High Press. | 1″ | KPS0308V01000 | 575 | 1501 | – | 4.05 | |
| 1-1/4 | KPS0308V01104 | 475 | 1265 | – | 4.65 | ||
| 1-1/2 | KPS0308V01102 | 389 | 1108 | – | 4.95 | ||
| 1-3/4 | KPS0308V01304 | 325 | 998 | – | 5.40 | ||
| 2 | KPS0308V02000 | 286 | 912 | – | 5.90 | ||
| 12 | KPS0308V12000 | * | – | – | 22.75 | ||
| 1-1/8″ Ultra High Press. | 1″ | KPS0308U01000 | 800 | 2071 | – | 4.15 | |
| 1-1/4 | KPS0308U01104 | 593 | 1729 | – | 4.85 | ||
| 1-1/2 | KPS0308U01102 | 522 | 1501 | – | 5.20 | ||
| 1-3/4 | KPS0308U01304 | 450 | 1338 | – | 5.60 | ||
| 2 | KPS0308U02000 | 387 | 1215 | – | 6.20 | ||
| 12 | KPS0308U12000 | * | – | – | 24.45 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 1/2″ | 1″ High Press. | 1″ | KPS0102H01000 | 512 | – | 1143 | $3.60 |
| 1-1/4 | KPS0102H01104 | 340 | – | 1025 | 4.00 | ||
| 1-1/2 | KPS0102H01102 | 325 | – | 946 | 4.35 | ||
| 1-3/4 | KPS0102H01304 | 275 | – | 878 | 4.85 | ||
| 2 | KPS0102H02000 | 250 | – | 834 | 5.10 | ||
| 24 | KPS0102H24000 | * | – | – | 35.35 | ||
| 1-1/8″ Very High Press. | 1″ | KPS0102V01000 | 681 | 1709 | – | 3.75 | |
| 1-1/4 | KPS0102V01104 | 525 | 1475 | – | 4.20 | ||
| 1-1/2 | KPS0102V01102 | 424 | 1318 | – | 4.60 | ||
| 1-3/4 | KPS0102V01304 | 350 | 1207 | – | 5.15 | ||
| 2 | KPS0102V02000 | 320 | 1123 | – | 5.40 | ||
| 24 | KPS0102V24000 | * | – | – | 39.20 | ||
| 1-1/4″ Ultra High Press. | 1″ | KPS0102U01000 | 863 | 2188 | – | 3.95 | |
| 1-1/4 | KPS0102U01104 | 675 | 1793 | – | 4.45 | ||
| 1-1/2 | KPS0102U01102 | 550 | 1529 | – | 4.90 | ||
| 1-3/4 | KPS0102U01304 | 492 | 1341 | – | 5.50 | ||
| 2 | KPS0102U02000 | 450 | 1200 | – | 5.80 | ||
| 24 | KPS0102U24000 | * | – | – | 43.90 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 5/8″ | 1-1/8″ High Press. | 1″ | KPS0508H01000 | 562 | – | 1224 | 3.85 |
| 1-1/4 | KPS0508H01104 | 446 | – | 1169 | 4.30 | ||
| 1-1/2 | KPS0508H01102 | 375 | – | 1133 | 4.70 | ||
| 1-3/4 | KPS0508H01304 | 323 | – | 1107 | 5.30 | ||
| 2 | KPS0508H02000 | 295 | – | 1087 | 5.60 | ||
| 24 | KPS0508H24000 | * | – | – | 41.35 | ||
| 1-1/4″ Very High Press. | 1″ | KPS0508V01000 | 794 | 1855 | – | 4.00 | |
| 1-1/4 | KPS0508V01104 | 600 | 1624 | – | 4.50 | ||
| 1-1/2 | KPS0508V01102 | 510 | 1310 | – | 5.00 | ||
| 1-3/4 | KPS0508V01304 | 424 | 1232 | – | 5.65 | ||
| 2 | KPS0508V02000 | 384 | 1185 | – | 5.90 | ||
| 24 | KPS0508V24000 | * | – | – | 45.45 | ||
| 1-3/8″ Ultra High Press. | 1″ | KPS0508U01000 | 975 | 2462 | – | 4.20 | |
| 1-1/4 | KPS0508U01104 | 775 | 2129 | – | 4.75 | ||
| 1-1/2 | KPS0508U01102 | 640 | 1907 | – | 5.25 | ||
| 1-3/4 | KPS0508U01304 | 546 | 1749 | – | 6.00 | ||
| 2 | KPS0508U02000 | 489 | 1630 | – | 6.30 | ||
| 24 | KPS0508U24000 | * | – | – | 49.95 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 3/4″ | 1-3/8″ High Press. | 1-1/4″ | KPS0304H01104 | 747 | – | 1725 | $5.55 |
| 1-1/2 | KPS0304H01102 | 642 | – | 1623 | 6.05 | ||
| 1-3/4 | KPS0304H01304 | 554 | – | 1550 | 6.50 | ||
| 2 | KPS0304H02000 | 479 | – | 1495 | 7.10 | ||
| 2-1/4 | KPS0304H02104 | 417 | – | 1452 | 7.50 | ||
| 2-1/2″ | KPS0304H02102 | 380 | – | 1418 | 7.95 | ||
| 24 | KPS0304H24000 | * | – | – | 50.95 | ||
| 1-1/2″ Very High Press. | 1-1/4″ | KPS0304V01104 | 975 | 2390 | – | 5.80 | |
| 1-1/2 | KPS0304V01102 | 810 | 2105 | – | 6.40 | ||
| 1-3/4 | KPS0304V01304 | 688 | 1902 | – | 6.90 | ||
| 2 | KPS0304V02000 | 591 | 1749 | – | 7.55 | ||
| 2-1/4 | KPS0304V02104 | 529 | 1631 | – | 8.00 | ||
| 2-1/2 | KPS0304V02102 | 475 | 1536 | – | 8.50 | ||
| 2-3/4 | KPS0304V02304 | 418 | 1458 | – | 9.15 | ||
| 24 | KPS0304V24000 | * | – | – | 56.70 | ||
| 1-3/4″ Ultra High Press. | 1-1/4″ | KPS0304U01104 | 1400 | 3382 | – | 6.45 | |
| 1-1/2 | KPS0304U01102 | 1200 | 3191 | – | 7.10 | ||
| 1-3/4 | KPS0304U01304 | 1015 | 2841 | – | 7.75 | ||
| 2 | KPS0304U02000 | 896 | 2578 | – | 8.55 | ||
| 2-1/4 | KPS0304U02104 | 796 | 2373 | – | 9.05 | ||
| 2-1/2 | KPS0304U02102 | 707 | 2210 | – | 9.70 | ||
| 2-3/4 | KPS0304U02304 | 551 | 2076 | – | 10.45 | ||
| 24 | KPS0304U24000 | * | – | – | 68.40 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 7/8″ | 1-5/8″ High Press. | 1-1/2″ | KPS0708H01102 | 855 | – | 2363 | 6.45 |
| 1-3/4 | KPS0708H01304 | 780 | – | 2213 | 7.00 | ||
| 2 | KPS0708H02000 | 745 | – | 2141 | 7.70 | ||
| 2-1/4 | KPS0708H02104 | 700 | – | 2072 | 8.10 | ||
| 2-1/2 | KPS0708H02102 | 670 | – | 1846 | 8.65 | ||
| 2-3/4 | KPS0708H02304 | 610 | – | 1741 | 9.30 | ||
| 3 | KPS0708H03000 | 560 | – | 1720 | 10.10 | ||
| 24 | KPS0708H24000 | * | – | – | 58.10 | ||
| 1-3/4″ Very High Press. | 1-1/2″ | KPS0708V01102 | 1045 | 3202 | – | 6.85 | |
| 1-3/4 | KPS0708V01304 | 955 | 2780 | – | 7.40 | ||
| 2 | KPS0708V02000 | 910 | 2464 | – | 8.20 | ||
| 2-1/4 | KPS0708V02104 | 855 | 2218 | – | 8.65 | ||
| 2-1/2 | KPS0708V02102 | 820 | 2021 | – | 9.25 | ||
| 2-3/4 | KPS0708V02304 | 750 | 1880 | – | 9.95 | ||
| 3 | KPS0708V03000 | 675 | 1726 | – | 10.85 | ||
| 24 | KPS0708V24000 | * | – | – | 64.05 | ||
| 2″ Ultra High Press. | 1-1/2″ | KPS0708U01102 | 1475 | 4079 | – | 7.60 | |
| 1-3/4 | KPS0708U01304 | 1345 | 3830 | – | 8.25 | ||
| 2 | KPS0708U02000 | 1285 | 3294 | – | 9.20 | ||
| 2-1/4 | KPS0708U02104 | 1205 | 3032 | – | 9.75 | ||
| 2-1/2 | KPS0708U02102 | 1155 | 2823 | – | 10.45 | ||
| 2-3/4 | KPS0708U02304 | 1055 | 2652 | – | 11.30 | ||
| 3 | KPS0708U03000 | 955 | 2508 | – | 12.35 | ||
| 24 | KPS0708U24000 | * | – | – | 76.05 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 1″ | 1-3/4″ High Press. | 1-1/4″ | KPS1000H01104 | 1137 | – | 2782 | $6.90 |
| 1-1/2 | KPS1000H01102 | 940 | – | 2588 | 7.50 | ||
| 1-3/4 | KPS1000H01304 | 788 | – | 2450 | 8.10 | ||
| 2 | KPS1000H02000 | 689 | – | 2346 | 8.85 | ||
| 2-1/4 | KPS1000H02104 | 616 | – | 2265 | 9.35 | ||
| 2-1/2 | KPS1000H02102 | 548 | – | 2201 | 9.90 | ||
| 2-3/4 | KPS1000H02304 | 505 | – | 2148 | 10.60 | ||
| 24 | KPS1000H24000 | * | – | – | 63.55 | ||
| 2″ Very High Press. | 1-1/4″ | KPS1000V01104 | 1550 | 4111 | – | 7.55 | |
| 1-1/2 | KPS1000V01102 | 1200 | 3330 | – | 8.25 | ||
| 1-3/4 | KPS1000V01304 | 971 | 2911 | – | 8.95 | ||
| 2 | KPS1000V02000 | 854 | 2624 | – | 9.85 | ||
| 2-1/4 | KPS1000V02104 | 770 | 2367 | – | 10.40 | ||
| 2-1/2 | KPS1000V02102 | 700 | 2262 | – | 11.10 | ||
| 2-3/4 | KPS1000V02304 | 636 | 2121 | – | 11.95 | ||
| 3 | KPS1000V03000 | 569 | 1985 | – | 13.00 | ||
| 4 | KPS1000V04000 | 423 | 1963 | – | 16.15 | ||
| 24 | KPS1000V24000 | * | – | – | 75.55 | ||
| 2-1/2″ Ultra High Press. | 1-1/4″ | KPS1000U01104 | 2593 | – | – | 10.60 | |
| 1-1/2 | KPS1000U01102 | 2136 | 4582 | – | 11.70 | ||
| 1-3/4 | KPS1000U01304 | 1796 | 4129 | – | 12.65 | ||
| 2 | KPS1000U02000 | 1524 | 3790 | – | 13.90 | ||
| 2-1/4 | KPS1000U02104 | 1316 | 3525 | – | 14.70 | ||
| 2-1/2 | KPS1000U02102 | 1212 | 3314 | – | 15.70 | ||
| 2-3/4 | KPS1000U02304 | 1106 | 3061 | – | 16.90 | ||
| 3 | KPS1000U03000 | 996 | 2851 | – | 18.40 | ||
| 4 | KPS1000U04000 | 734 | 2272 | – | 22.85 | ||
| 24 | KPS1000U24000 | * | – | – | 107.30 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 1-1/4″ | 2-1/2″ High Press. | 2″ | KPS1104H02000 | 1860 | – | – | 13.35 |
| 2-1/4 | KPS1104H02104 | 1750 | – | – | 14.10 | ||
| 2-1/2 | KPS1104H02102 | 1675 | – | – | 15.00 | ||
| 2-3/4 | KPS1104H02340 | 1530 | – | – | 16.15 | ||
| 3 | KPS1104H03000 | 1380 | – | – | 17.55 | ||
| 24 | KPS1104H24000 | * | – | – | 100.45 | ||
| Fits Punch Body Diam. | O.D. | Lgth. | Part No. | Lb. Per 1/8″ Def. | Lb. Per 3/8″ Def. | Lb. Per 1/2″ Def. | Price |
| 1-1/2″ | 2-3/4″ High Press. | 2″ | KPS1102H02000 | 2105 | – | – | 14.65 |
| 2-1/4 | KPS1102H02104 | 1980 | – | – | 15.50 | ||
| 2-1/2 | KPS1102H02102 | 1900 | – | – | 16.55 | ||
| 2-3/4 | KPS1102H02304 | 1730 | – | – | 17.85 | ||
| 3 | KPS1102H03000 | 1565 | – | – | 19.45 | ||
| 24 | KPS1102H24000 | * | – | – | 115.90 |
Tubes/Springs – 12″ Lengths
Additional sizes of tubes and springs are listed below. We may be able to accommodate you with additional sizes beyond what you see here. Please Contact us if you would like to discuss another option, special durometer or sizing. In addition we are able to cut these to specific sizes and color them based on your drawing or specifications.
Pricing Current as of 2020
| I.D. | O.D. | Price | I.D. | O.D. | Price |
| 1/8″ | 3/8″ | $16.75 | 5/16 | 15/16 | 20.40 |
| 1/8 | 1/2 | 17.35 | 5/16 | 1 | 21.10 |
| 1/8 | 3/4 | 19.20 | 5/16 | 1-1/8 | 22.60 |
| 1/8 | 1-1/8 | 23.10 | 5/16 | 1-1/4 | 24.30 |
| 1/8 | 1-1/2 | 28.70 | 5/16 | 1-1/2 | 28.20 |
| 1/8 | 1-3/4 | 33.30 | 5/16 | 1-3/4 | 32.80 |
| 3/16 | 5/8 | 18.00 | 5/16 | 2 | 38.10 |
| 3/16 | 3/4 | 18.75 | 3/8 | 5/8 | 19.30 |
| 3/16 | 7/8 | 19.90 | 3/8 | 3/4 | 20.30 |
| 3/16 | 1 | 21.25 | 3/8 | 13/16 | 20.85 |
| 3/16 | 1-1/2 | 28.30 | 3/8 | 15/16 | 22.10 |
| 1/4 | 5/8 | 17.90 | 3/8 | 1-1/4 | 25.95 |
| 1/4 | 1-1/8 | 22.60 | 3/8 | 1-3/8 | 27.80 |
| 1/4 | 1-1/4 | 24.30 | 3/8 | 1-1/2 | 29.85 |
| 1/4 | 1-1/2 | 28.20 | 3/8 | 1-3/4 | 34.45 |
| 1/4 | 1-5/8 | 30.40 | 3/8 | 2 | 39.75 |
| 9/32 | 1 | 20.90 | 3/8 | 2-1/2 | 52.50 |
| 5/16 | 9/16 | 17.25 | 3/8 | 3 | 68.10 |
| 5/16 | 5/8 | 17.65 | 25/64 | 7/8 | 21.25 |
| 5/16 | 3/4 | 18.65 | 7/16 | 3/4 | 19.75 |
| 5/16 | 7/8 | 19.80 |
Tubes/Springs – 24″ Lengths
| I.D. | O.D. | Price | I.D. | O.D. | Price |
| 7/16″ | 7/8″ | $34.95 | 1 | 3-1/16 | 138.20 |
| 7/16 | 1 | 37.45 | 1 | 3-1/4 | 150.90 |
| 7/16 | 1-1/4 | 43.35 | 1 | 3-1/2 | 168.95 |
| 7/16 | 1-3/8 | 46.80 | 1 | 3-3/4 | 188.35 |
| 7/16 | 1-1/2 | 50.60 | 1 | 4 | 209.05 |
| 1/2 | 3/4 | 32.45 | 1-1/16 | 1-3/4 | 59.75 |
| 1/2 | 7/8 | 34.60 | 1-1/16 | 2 | 71.35 |
| 1/2 | 1-3/8 | 48.30 | 1-1/16 | 2-1/4 | 82.70 |
| 1/2 | 1-1/2 | 52.15 | 1-1/16 | 2-1/2 | 95.40 |
| 1/2 | 1-3/4 | 60.80 | 1-3/32 | 2-1/4 | 82.20 |
| 1/2 | 1-13/16 | 63.15 | 1-1/8 | 1-3/8 | 45.05 |
| 1/2 | 2 | 70.80 | 1-1/8 | 1-1/2 | 50.75 |
| 1/2 | 2-1/2 | 94.85 | 1-1/8 | 1-5/8 | 54.90 |
| 1/2 | 3 | 124.25 | 1-1/8 | 1-3/4 | 59.45 |
| 1/2 | 3-1/4 | 135.90 | 1-1/8 | 2 | 69.45 |
| 33/64 | 13/16 | 32.60 | 1-1/8 | 2-1/4 | 80.85 |
| 33/64 | 1 | 36.15 | 1-1/8 | 2-9/16 | 96.90 |
| 33/64 | 2 | 70.50 | 1-1/8 | 3 | 122.90 |
| 9/16 | 3/4 | 31.00 | 1-1/4 | 1-1/2 | 66.35 |
| 9/16 | 1 | 36.90 | 1-1/4 | 1-5/8 | 70.85 |
| 9/16 | 1-1/4 | 42.90 | 1-1/4 | 1-3/4 | 75.30 |
| 9/16 | 1-3/8 | 46.40 | 1-1/4″ | 1-7/8″ | $80.15 |
| 9/16 | 2 | 68.90 | 1-1/4 | 2 | 85.35 |
| 9/16 | 2-1/2 | 92.95 | 1-1/4 | 2-3/4 | 123.40 |
| 9/16 | 3 | 122.35 | 1-1/4″ | 3″ | $138.75 |
| 5/8 | 3/4 | 34.95 | 1-1/4 | 3-1/4 | 155.45 |
| 5/8 | 1 | 39.65 | 1-3/8 | 1-3/4 | 65.45 |
| 5/8 | 1-1/2 | 54.85 | 1-3/8 | 1-7/8 | 77.65 |
| 5/8 | 1-5/8 | 59.05 | 1-3/8 | 2 | 82.30 |
| 5/8 | 1-3/4 | 63.55 | 1-3/8 | 2-1/2 | 106.85 |
| 5/8 | 2 | 73.60 | 1-3/8 | 3-1/4 | 152.90 |
| 5/8 | 2-1/8 | 79.10 | 1-3/8 | 3-1/2 | 170.95 |
| 5/8 | 2-1/4 | 84.95 | 1-1/2 | 1-7/8 | 81.40 |
| 5/8 | 2-1/2 | 97.65 | 1-1/2 | 2 | 83.80 |
| 41/64 | 1 | 38.30 | 1-1/2 | 2-1/4 | 95.10 |
| 41/64 | 1-1/8 | 43.90 | 1-1/2 | 2-1/2 | 107.80 |
| 41/64 | 1-3/8 | 48.95 | 1-1/2 | 3 | 137.15 |
| 41/64 | 1-3/4 | 61.45 | 1-1/2 | 3-1/2 | 171.90 |
| 41/64 | 2 | 71.50 | 1-1/2 | 4 | 211.95 |
| 21/32 | 1 | 38.75 | 1-5/8 | 2 | 70.20 |
| 11/16 | 1-1/4 | 43.65 | 1-5/8 | 2-1/4 | 85.95 |
| 3/4 | 7/8 | 40.45 | 1-5/8 | 2-1/2 | 101.00 |
| 3/4 | 1 | 42.95 | 1-5/8 | 3 | 131.00 |
| 3/4 | 1-1/8 | 45.75 | 1-3/4 | 2-1/4 | 86.95 |
| 3/4 | 1-1/4 | 48.95 | 1-3/4 | 2-3/8 | 95.55 |
| 3/4 | 1-13/16 | 70.85 | 1-3/4 | 2-1/2 | 102.05 |
| 3/4 | 1-7/8 | 73.30 | 1-3/4 | 3 | 131.45 |
| 3/4″ | 2″ | $78.50 | 1-3/4 | 3-1/4 | 148.15 |
| 3/4 | 2-1/4 | 89.85 | 1-7/8 | 3 | 115.30 |
| 3/4 | 2-1/2 | 102.50 | 1-7/8 | 3-1/2 | 157.20 |
| 3/4 | 2-3/4 | 116.55 | 2 | 2-1/2 | 82.20 |
| 3/4 | 3 | 131.90 | 2 | 2-3/4 | 102.40 |
| 13/16 | 1-1/2 | 55.15 | 2 | 3 | 117.75 |
| 13/16 | 1-3/4 | 65.65 | 2 | 3-1/4 | 134.45 |
| 27/32 | 3-1/8 | 142.75 | 2 | 3-1/2 | 152.50 |
| 7/8 | 1-1/8 | 43.65 | 2 | 4 | 192.55 |
| 7/8 | 1-1/4 | 46.80 | 2-1/16 | 3-1/4 | 129.50 |
| 7/8 | 1-3/8 | 50.25 | 2-1/16 | 4 | 192.15 |
| 7/8 | 1-1/2 | 54.00 | 2-1/16 | 4-5/8 | 249.75 |
| 7/8 | 1-11/16 | 61.75 | 2-1/8 | 3 | 110.70 |
| 7/8 | 2-1/16 | 78.70 | 2-1/4 | 3 | 104.85 |
| 7/8 | 2-1/2 | 100.10 | 2-1/4 | 3-1/2 | 143.60 |
| 7/8 | 3 | 129.45 | 2-1/4 | 4 | 183.65 |
| 7/8 | 3-1/4 | 146.15 | 2-3/8 | 3 | 98.85 |
| 7/8 | 3-1/2 | 164.20 | 2-3/8 | 4 | 177.55 |
| 1 | 1-1/4 | 47.80 | 2-1/2 | 3 | 91.60 |
| 1 | 1-3/8 | 51.25 | 2-1/2 | 4 | 170.60 |
| 1 | 1-1/2 | 55.50 | 3 | 4 | 142.55 |
| 1 | 2-1/4 | 87.35 | 3 | 5 | 240.50 |
| 1 | 3 | 134.25 | 4 | 5 | 200.15 |